Drive the module with a timing belt
Once the LRE linear module has been built, a timing belt system can automate the slide. Many different motors can be attached to the unit, depending on the application.
Timing Belts
Quiet-running timing belts are attached to the module with timing belt tensioners.
Timing Belt R10 T5, black
0.0.400.04
Max. L = 50m
Timing Belt R25 T10, black
0.0.337.10
Max. L = 50m
Timing Belt Tensioners
The tensioners can be installed underneath the sliding carriage or at the profile end.
Timing-Belt Tensioner, Fixing Block 5 R10
0.0.400.06
Timing-Belt Tensioner, Tensioning Block 5 R10
0.0.400.07
Timing Belt Tensioner, Fixing Block 8 R25
0.0.426.30
Timing-Belt Tensioner, Tensioning Block 8 R25
0.0.426.29
Timing Belt Reverse Units
Loop the timing belt around the module with Reverse Units.
Timing-Belt Reverse Unit 5 40 R10 VK14
0.0.410.01
Timing-Belt Reverse Unit 5 40 R10 with Bore
0.0.410.06
Timing-Belt Reverse Unit 8 40 R25 VK14
0.0.337.26
Timing-Belt Reverse Unit 8 40 R25 with Bore
0.0.337.34
Timing-Belt Reverse Unit 8 80 R25 VK14
0.0.366.02
Timing-Belt Reverse Unit 8 80 R25 VK32
0.0.366.11
Timing-Belt Reverse Unit 8 80 R25 with Bore
0.0.366.07